ET X-08 2000DPI Adjustable 2.4G Wireless Professional Gaming Mouse Mice

Product Specifications
Product size: L=123.5mm * W=71mm * H=39mm
Weight: About 80g(Without battery)
Buttons: 7 buttons with scroll wheel
Working Voltage: 1.5V
Working Current: 6.5mA/9mA(LED light)
Power supply: 1 x AA battery Required(Battery not included)
Key stretch:70±10g
CPI: 800/1200/1600/2000/2400
Scanning Speed: 30IPS
Transmission Distance: 10m
Switch Life: 5 million cycle
Cordless Carrier Frequency: 2402MHz-2480MHz
USB Interface: USB 2.0, also compatible with USB 1.1

O.S requirement: Windows XP/Vista/Win 7/Win 8/Mac OS x/Linux
Installation:
1. Find the wireless mouse and receiver in package.
2. Plug receiver to USB port on PC
3. 1pc AA battery into Mouse body Properly(Battery not included in package)
4. LED indicator will keep flash for few seconds,the Mouse is ready to work.

Advanced function
1. DPI adjustable function
With 5 adjustable DPI 800/1200/1600/2000/2400,factory setting is 1200 DPI,Press the switch button on top of Mouse can easy to adjust DPI.LED indicator will flash one time while it converting to 800 CPI,LED will flash twice while it converting to 1200 CPI,LED will flash three times while it converting to 1600 DPI,LED will flash four times while it converting to 2000 DPI,LED will flash five times while it converting to 2400 DPI.

2. LED backlighting
There are three parts on top of mouse have LED backlighting,it is located in scroll wheel,logo part and the decorated line.LED switch button is on bottom of mouse,there are three option ON,OFF,ON/light,put it at ON/light,the LED will be lighting up.

4. Lower power indicator for alarm to change new battery
As the mouse working in a certain time,the battery will be out of power,low power indicator will be flash in red,to alarm you change new battery.

5. Saving power mode and power switch off
If mouse is stay out of work for 8 minutes.it will turn to power saving mode,press any button to restart it.
If you turn off PC or take out Nano receiver from USB port,press any button or move the mouse to enter the power saving mode.

6. Nano receiver
A very smalll size design for Nano receiver,it can be plug and stay on USB port of PC/Notebook without interference.
Portable design for travel,Nano receiver can be plug in the slot on bottom of mouse.

7. Polling rate adjustable function
2 adjustable polling rate 125Hz/250Hz,default as 250Hz,Press and hold the right button and scroll wheel button to converting,the LED flash 5 times in low speed for 125Hz converting,the LED flash 5 times in fast speed for 250Hz converting.

8. Reconnection
Both of mouse and Nano receiver has a built-in code,It can be setting one mouse to one receiver,or few of mouse to one receiver.Mouse and receiver need to reconnect under the condition of High temperature,high magnetic,strong vibrate.
a. Plug off nano receiver from USB port,and plug it on.
b. Keep the mouse in 50cm with receiver,re-store the battery.
c. You can use it by reconnection.