Product Information

The Briwellna 2 in 1 Instant Water Heater Faucet features a high quality stainless steel finish and dispenses both standard hot & cold water. Good design often means as little design as possible – paring down to only the essential elements required to achieve the desired effect. The principle of ‘simplicity by design’ is that a good design solution is the most simple solution to the design problem. Briwellna products deliver great results and looks great by simply adhering to this principle. The Instant Heating Faucet is functional, easy to use, fit and maintain. It comes complete with an easy to install faucet. The faucet comes complete with manuals in multiple languages and detailed installation guidance.

*Please note :

Temperature of hot water outflow depends on the water temperature from inlet as well as the volume of water flow. It’s varied in different situation and can be adjusted easily by swiveling the lever.

Adjust temperature by lever easily:

Hot water position: Turn downward the lever, hot water outflow decreases and water temperature goes up. The smaller the water flow, the higher the temperature.

Features:

✔ Provides hot, cold in one tap

✔ Includes faucet, wire and manual

✔ Hot & cold mixer lever handle for regular mains supplied water

✔ Precision engineered stainless steel construction to the highest standard with individual human hand testing.

✔ In-built instant heating tube for hot & cold mains supplied water.

✔ High Quality Brushed Stainless Steel

✔ Eco-friendly – activates only with water flow

Instant and endless hot water on demand without the wait or worry of ever running out

State of the art instant water heating technology

The secret to the success of the system is in the complete circuit link triggered by stable water pressure.

The compact faucet is not under heating state when you turn on the cold water switch, so the system reduces heat loss with up to 2 to 4 times less heat loss compared to a traditional water heater appliance – Saving you money and lowering CO2. . The interior component has several electrical safety features. A temperature sensor to give an accurate digital external reading of the current water temperature. The temperature sensor is located at the water outlet to indicate temperature more accurately. The interior component is equipped with a thermal protector pole, which is at the top of the heating tube. So the fuse is blown out more accurately without recurring of dry burning. This avoids dry start that would damage the shell. An overheat stat to ensure the unit never overcooks.

Specification:

• Rated Input: 3.2kw

• Rated Voltage/Frequency: 220V-240V~, 50HZ

• Rated Current: 13.6A

• Operating Water Pressure: 0.4 to 5 bar/0.04 to 0.5Mpa

• IPX Classification: IPX4

• Power Cord Length: 1.4M

• Temperature Control: 30°C to 60°C

• Guarantee: 1 year

The outlet temperature is determined by:

• The temperature of the incoming water supply.

• The kW rating of the unit.

• The speed at which the water flows through the unit

Notice:

DON’T test it in your hands before installing finished, that’s would be very dangerous. Please operate it under the user manual. Vertical installation, when the installation is completed, water first and then power up
.

Kitchen,Toilet,Washroom,etc … All Can Use, Convenient, Simple, Easy To Install